Front Door Handle: Service and Repair
HANDLE BEZEL REPLACEMENT - INSIDEREMOVAL PROCEDURE
1. Remove the screw that retains the front inside door handle bezel to the door trim panel.
2. Remove the screw that retains the rear inside door handle bezel to the door trim panel.
3. Remove the inside door handle bezel from the door trim panel by sliding rearward.
INSTALLATION PROCEDURE
1. Route the inside door handle and the lock rod through the appropriate openings in the bezel.
2. Align the lock rod to the door lock knob.
3. Position the bezel and snap the bezel into place.
4. Install the rear inside door handle bezel to the door trim panel.
5. Install the front inside door bezel to the door trim panel.
NOTE: Refer to Fastener Notice in Service Precautions.
6. Insert the screw that retains the inside door handle bezel to the door trim panel.
Tighten
Tighten the screw to 1.9 N.m (17 lb in).