Console Replacement - Front Floor (Full Length (Auto Trans))

REMOVAL PROCEDURE




1. Remove the shift handle retaining cup at the front of the handle.
2. Remove the shift handle from the shift lever.




3. Open the console lid.
4. Remove the console compartment inserts.




5. Remove the transmission select switch (if equipped).




6. Remove the nuts that retain the rear of the console.
7. Remove the cup holder insert.
8. Remove the screws that retain the front of the console to the vehicle.
9. Remove the console from the vehicle.

INSTALLATION PROCEDURE




1. Install the console to the vehicle.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the screws that retain the front of the console.

Tighten
Tighten the screws to 7 N.m (63 lb in).

3. Install the cup holder insert.
4. Install the nuts that retain the rear of the console.

Tighten
Tighten the nuts to 10 N.m (89 lb in).




5. Install the transmission select switch (if equipped).




6. Install the console compartment insert.
7. install the console compartment insert screws.

Tighten
Tighten the nuts to 1.9 N.m (17 lb in).




8. install the shift handle to the shift lever.
9. Install the shift handle retaining clip at the front of the handle.