3. Clutch Pilot Bearing Removal

Clutch Pilot Bearing Removal

^ Tools Required
- J 43276 Clutch Pilot Bearing Remover

Caution: Refer to Safety Glasses Caution in Service Precautions.

Notice: When using the J 43276 Clutch Pilot Bearing Remover always secure the J 43276-1 Clutch Pilot Bearing Remover tool body using a wrench. Do not allow the J 43276-1 tool body to rotate. Failing to do so will cause damage to the J 43276-1 tool body.





1. Remove the clutch pilot bearing using the J 43276.
1.1. Install the J 43276-1 tool body into the clutch pilot bearing.
1.2. Using a wrench secure the J 43276-1 tool body.
1.3. Insert the J 43276-2 forcing screw into the J 43276-1 tool body.
1.4. Rotate the J 43276-2 forcing screw clockwise into the J 43276-1 tool body until the clutch pilot bearing is completely removed from the crankshaft.
1.5. Rotate the J 43276-2 forcing screw counterclockwise to remove the J 43276-2 forcing screw from the J 43276-1 tool body.
1.6. Remove the J 43276-1 tool body from the clutch pilot bearing.
2. Discard the clutch pilot bearing.