Lock Replacement - Sliding Door

Lock Replacement - Sliding Door

Removal Procedure

1. Remove the trim panel. Refer to Trim Panel Replacement - Door (Service and Repair) .
2. Remove the water deflector. Refer to Water Deflector Replacement - Sliding Door (Water Deflector Replacement - Sliding Door) .
3. Remove the upper access cover, if equipped.




4. Remove the lock rods (1) from the lock assembly (1 and 3).




5. Disconnect the electrical connector from the lock (5).
6. Remove the lock bolts (1).




7. Remove the lock from the door (2).



Installation Procedure





1. Install the lock to the door (2).

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the lock bolts (1).

Tighten the lock bolts to 9 N.m (80 lb in).





3. Connect the electrical connector (5) to the lock.




4. Install the lock rods (1 and 3).
5. Install the upper access cover, if equipped.
6. Install the water deflector. Refer to Water Deflector Replacement - Sliding Door (Water Deflector Replacement - Sliding Door) .
7. Install the trim panel. Refer to Trim Panel Replacement - Sliding Door (Service and Repair) .