Instrument Panel (IP) - Carrier Support Replacement

IP Carrier Support Replacement

Removal Procedure

1. Remove the instrument panel from the vehicle. Refer to IP Assembly Replacement (Instrument Panel (IP) - Assembly Replacement) .
2. Remove the bolts that retain the carrier support to the cowl side panel.




3. Remove the carrier support from the vehicle.



Installation Procedure





1. Install the carrier support to the vehicle.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the bolts that retain the carrier support to the cowl side panel.

Tighten the bolts that retain the carrier support to the cowl side panel to 25 N.m (18 lb ft).

3. Install the instrument panel to the vehicle.
Refer to IP Assembly Replacement (Instrument Panel (IP) - Assembly Replacement) .