Control Module: Service and Repair

Transfer Case Shift Control Module Replacement

Removal Procedure





1. Remove the parking brake assembly.





2. Remove the lower dash panel.





3. Remove the electrical connectors from the control module.
4. Remove the mounting screws for the control module.
5. Remove the control module from the mounting bracket.

Installation Procedure





1. Install the control module in the mounting bracket.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the mounting screws for the control module.
Tighten the mounting screws to 6 Nm (53 inch lbs.).
3. Install the electrical connectors in the control module.





4. Install the lower dash panel.





5. Install the parking brake assembly.