Cruise Control Module: Service and Repair
REMOVAL PROCEDURE1. Remove the cruise control cable.
2. Disconnect the electrical connector.
3. Remove the cruise control module bolts.
4. Remove the cruise control module.
INSTALLATION PROCEDURE
1. Install the cruise control module.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the cruise control module bolts.
Tighten
Tighten the cruise control module bolts to 12 N.m (106 lb in).
3. Connect the electrical connector.
IMPORTANT: The cruise control cable does not require mechanical adjusting after the replacement. The cruise control module internally adjusts the cable.
4. Install the cruise control cable.
5. Perform the functional check.