Exterior Moulding / Trim: Service and Repair

Tail Lamp, Back Body Opening Applique Replacement - Side

Removal Procedure





1. Remove the screws that retain the back body opening applique to the body.
2. Remove the nuts that retain the applique to the body.
3. Remove the applique from the vehicle.



Installation Procedure





1. Install the back body opening applique to the vehicle.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the nut which retains the applique to the body.

Tighten the nut to 6 N.m (53 lb in).

3. Install the screw which retains the applique to the body.

Tighten the screw to 3 N.m (27 lb in).