Air Flow Meter/Sensor: Service and Repair
MASS AIR FLOW (MAF) SENSORREMOVAL PROCEDURE
1. Turn OFF the ignition.
2. Disconnect the mass air flow (MAF) sensor harness connector.
3. Loosen the clamps (1) on the MAF sensor.
4. Carefully remove the MAF sensor from the air intake ducts (5).
INSTALLATION PROCEDURE
IMPORTANT: Ensure that the MAF sensor flow arrows point away from the air cleaner assembly.
1. Install the MAF sensor (5) into the air intake ducts.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Tighten the clamps (1) on the MAF sensor.
Tighten
Tighten the clamps to 4 N.m (35 lb in).
3. Connect the MAF sensor harness connector.