Sliding Door Stop Replacement

Sliding Door Stop Replacement

Removal Procedure





1. Remove the passenger side body side trim panel. Refer to Trim Panel Replacement - Right Body Side (Trim Panel Replacement - Right Body Side) in Interior Trim.
2. Remove the nut that retains the sliding door stop to the body.
3. Remove the sliding door stop from the vehicle.



Installation Procedure





1. Install the sliding door stop to the vehicle.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the nut in order to retain the sliding stop to the body.

Tighten the retaining nut to 25 N.m (18 lb ft).

3. Install the passenger side body side trim panel. Refer to Trim Panel Replacement - Right Body Side (Trim Panel Replacement - Right Body Side) in Interior Trim.