Fog Lamp Bulb Replacement - Front (Luxury Y91)

REPLACEMENT PROCEDURE

CAUTION: Halogen bulbs contain gas under pressure. Handling a bulb improperly could cause it to shatter into flying glass fragments. To help avoid personal injury:
- Turn off the lamp switch and allow the bulb to cool before changing the bulb.
- Leave the lamp switch OFF until the bulb change is complete.
- Always wear eye protection when changing a halogen bulb.
- Handle the bulb only by its base. Avoid touching the glass.
- Keep dirt and moisture off the bulb.
- Properly dispose of the used bulb.
- Keep halogen bulbs out of the reach of children.




1. Disconnect the electrical connector (2) from the back of the fog lamp bulb (1).




2. Remove the fog lamp bulb (2) from the lamp housing (1) by turning counterclockwise 45 degrees.

INSTALLATION PROCEDURE




1. Install the fog lamp bulb into the lamp housing.
2. Rotate the bulb (1) 45 degrees clockwise in order to secure.
3. Connect the electrical connector (2).

"For a description of the RPO Code(s) shown in this article or any of the images therein, refer to the RPO Code List found at Vehicle/Application ID". RPO Codes