Drum Brake Hardware Replacement
Drum Brake Hardware ReplacementRemoval Procedure
1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel assembly.
3. Remove the brake drum.
4. Remove the brake shoe return springs.
5. Remove the brake shoe guide.
6. Remove the hold down springs.
7. Remove the hold down pins.
8. Remove the actuator lever and the actuator lever pivot.
9. Remove the actuator lever and the lever pivot.
10. Remove the lever return spring.
11. Inspect all remaining parts for discoloration due to heat or stress. Replace parts as needed.
Installation Procedure
1. Install the actuator lever and the lever pivot.
2. Install the actuator lever return spring.
3. Install the hold down pins.
4. Install the hold down springs.
5. Install the brake shoe guide.
6. Install the brake shoe return springs.
7. Install the brake drum.
8. Install the tire and wheel assembly.
9. Adjust the brakes.
10. Lower the vehicle.