Shift Lever - Assemble

Shift Lever - Assemble - Off Vehicle





1. Install the shift lever seal (2) onto the shift lever assembly (4).
2. Install the shift lever assembly (4).

Notice: Refer to Fastener Notice in Service Precautions.

3. Install the shift lever screw (3) into the shift lever assembly (4).
Tighten the screw to 1.5 Nm (13 inch lbs.).
4. Slide the shift lever seal (2) down the shift lever assembly (4).

Caution: Refer to SIR Inflator Module Coil Caution in Service Precautions.

5. Install the upper and lower trim covers.
6. Enable the inflatable restraint steering wheel module.