Park/Turn Signal Lamp Replacement (New Style)

PARK/TURN SIGNAL LAMP REPLACEMENT (NEW STYLE)

REMOVAL PROCEDURE
1. Ensure the headlamp switch is in the OFF position.




2. Remove the headlamp.
3. Remove the park/turn signal lamp assembly by pushing on the inboard retainer clip (1).
4. Disconnect the electrical connector from the assembly.
5. Remove the lamp assembly from the vehicle.

INSTALLATION PROCEDURE




1. Install the electrical connector to the park/turn signal lamp assembly.
2. Align the lamp assembly to the vehicle.
3. Secure the retaining clip by pushing inward on the lamp assembly.
4. Install the headlamp.