Interior - 2nd Row Seat Center Armrest Panel Warping

File In Section: 08 - Body and Accessories

Bulletin No.: 03-08-50-001

Date: January, 2003

TECHNICAL

Subject:
Second Row Seat Center Armrest Panel Warping
(Replace Panel)

Models:
2003 Cadillac Escalade, Escalade EXT
2003 Chevrolet Avalanche, Silverado Crew Cab, Suburban, Tahoe
2003 GMC Sierra Crew Cab, Yukon, Yukon XL

Condition

Some customers may comment that the second row seat center armrest panel is warped.

Correction

Replace the second row seat center armrest panel using the procedure and part numbers listed below. This new panel is more robust.

1. Lower the second row seat center armrest.

2. Remove the two fasteners.

3. Lift and remove the plastic insert panel from the seat back.

4. Install the new plastic insert panel by sliding it into the seat back, aligning the mounting holes in the panel with the mounting holes in the seat back frame.

5. Install the two new fasteners.





Parts Information

Parts are currently available from GMSPO.

Warranty Information





For vehicles repaired under warranty, use the table.





Disclaimer