Seat Back Frame Replacement - Rear

SEAT BACK FRAME REPLACEMENT - REAR

REMOVAL PROCEDURE




1. Remove the seat from the vehicle.
2. Remove the armrest, if equipped.
3. Partially remove the seat-back cover in order to gain access to the retaining bolts.
5. Remove the seat-back frame (4) from the seat back cushion frame.

INSTALLATION PROCEDURE




1. Install the seat-back frame (4) to the seat cushion frame.
2. Install the bolts which retain the seat-back frame to the seat cushion frame.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the bolts to 35 N.m (26 lb ft).

3. Install the seat-back cover.
4. Install the armrest to the seat back.
5. Install the seat to the vehicle.