Support Replacement - Radiator Grille Reinforcement

Support Replacement - Radiator Grille Reinforcement

Removal Procedure

1. Remove the headlamps.
2. Remove the park/turn signal lamps.
3. Remove the grille.
4. Remove the front fascia.




5. Remove the retaining bolts (3) from the grille reinforcement.
6. Remove the retaining screws (2) from the grille reinforcement.
7. Remove the reinforcement from the vehicle.

Installation Procedure




1. Install the reinforcement to the vehicle.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the retaining screws (2) to the grille reinforcement.

Tighten the screws to 7 N.m (62 lb in).

3. Install the retaining bolts (3) to the reinforcement.

Tighten the screws to 7 N.m (62 lb in).

4. Install the park/turn signal lamps.
5. Install the headlamps.
6. Install the grille.