Fog Lamp Replacement - Front (New Style)

FOG LAMP REPLACEMENT - FRONT (NEW STYLE)

REMOVAL PROCEDURE




1. Disconnect the electrical connector from the fog lamp.
2. Remove the retainers that attach the fog lamp to the bracket.
3. Remove the fog lamp from the bumper fascia.

INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the fog lamp bolt to 9 N.m (7 lb ft).




2. Install the fog lamp to the bumper fascia.
3. Install the retainers that attach the fog lamp to the bracket.
4. Connect the electrical connector to the fog lamp.
5. Inspect the fog lamp aiming.