55. C2 Clutch Reaction Plate Inspection

C2 Clutch Reaction Plate Inspection





Important:
^ Measure as described below at a minimum of 3 locations.
^ Replace any C2 clutch reaction plate that does not meet specifications.

1. Measure the thickness of each C2 clutch reaction plate (1) at dimension A.

C2 Clutch Reaction Plate Thickness
Minimum thickness is 2.135 mm (0.084 inch).





Important: Check the plates for coning on level surface.

2. Measure the cone of plate (1) a, dimension A.

C2 Clutch Reaction Plate Cone
Maximum cone is 0.240 mm (0.0094 inch)