26. C3 Clutch Piston Removal

C3 Clutch Piston Removal





Important: The preferred method of dislodging the C3 clutch piston is with compressed air. Use a 9.5 mm (3/8 inch) rubber hose on the air connection to reach into the C3 clutch annulus port. When shooting air into the annulus port, ensure that the rubber hose covers both of the C3 clutch annulus port holes. If compressed air is not available, remove the C3 clutch piston assembly using pliers

1. Position the air hose so that the hose covers both C3 clutch annulus hoses (1).





2. Shoot air into the C3 clutch annulus port until C3 clutch piston assembly (1) is dislodged.
3. Remove C3 clutch piston assembly (1).