Seat Replacement - Rear No. 2
SEAT REPLACEMENT - REAR NO. 2REMOVAL PROCEDURE
1. Remove the three nuts securing the seat assembly to the vehicle.
2. Remove the seat belt anchors from the floor studs.
3. Remove the three seat mounting bolts.
4. Remove the seat assembly from the vehicle.
INSTALLATION PROCEDURE
1. Install the seat assembly onto the floor studs in the vehicle.
2. Install the two seat belt anchors onto the floor studs.
3. Install the three seat mounting nuts.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the rear seat mounting nuts to 45 N.m (33 lb ft).
4. Install the three seat mounting bolts.
Tighten
Tighten the rear seat mounting bolts to 45 N.m (33 lb ft).