Transmission Support Replacement

Transmission Support Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the fuel tank shield.
3. Remove the evaporative emission (EVAP) canister from its mounting bracket. Do not disconnect the canister lines.
4. Support the transmission with a transmission jack.




5. Remove the transmission mount to the transmission support retaining nuts.




6. Remove the lower transmission support to the frame mounting bolts.




7. Remove the upper transmission support to the frame mounting bolts.
8. Remove the transmission support from the frame.

Installation Procedure




1. Install the transmission support to the frame.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the upper transmission support to the frame mounting bolts.

Tighten the upper transmission support to the frame mounting bolts to 80 N.m (59 lb ft).




3. Install the lower transmission support to the frame mounting bolts.

Tighten the bolts to 50 N.m (37 lb ft).

4. Lower the transmission onto the transmission support.




5. Install the transmission mount to the transmission support retaining nuts.

Tighten the transmission mount to the transmission support retaining nuts to 46 N.m (35 lb ft).

6. Install the evaporative emission (EVAP) canister.
7. Install the fuel tank shield.
8. Lower the vehicle.