Seat Back Hinge Cover Replacement - Rear No. 1

SEAT BACK HINGE COVER REPLACEMENT - REAR NO. 1

REMOVAL PROCEDURE




1. Remove the screws from the inboard/outboard rear seat back hinge covers.
2. Remove the rear seat back hinge cover halves.

INSTALLATION PROCEDURE
1. Install the inboard/outboard rear seat back hinge cover halves around the seat back hinges.




2. Install the inboard/outboard rear seat back hinge cover screws.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the rear seat back hinge cover screws to 2 N.m (18 lb in).