Seat Cushion Bracket Replacement - Rear No. 1 (TrailBlazer EXT, Envoy XL)

Seat Cushion Bracket Replacement - Rear No. 1 (Trailblazer EXT, Envoy XL)

Removal Procedure

1. Remove the seat from the vehicle.




2. Remove the rear seat bracket trim covers (1).
3. Remove the rear seat cushion bracket mounting nuts (2).
4. Remove the rear seat cushion bracket.

Installation Procedure






Notice: Refer to Fastener Notice in Service Precautions.

1. Install the rear seat cushion bracket to the seat cushion bottom with the four mounting nuts (2).

Tighten the rear seat cushion bracket mounting nuts to 25 N.m (18 lb ft).

2. Install the rear seat bracket trim covers (1).
3. Install the seat in the vehicle.