Seat Adjuster Cross Bar Replacement - Rear No. 2
SEAT ADJUSTER CROSS BAR REPLACEMENT - REAR NO. 2REMOVAL PROCEDURE
1. Unhook the seat back cushion extension panel strap (1) from the extension panel (2).
2. Remove the J-strip (1) from the seat adjuster cross bar (2).
3. Remove the two bolts (3) from the seat adjuster cross bar (2).
4. Remove the seat adjuster cross bar.
INSTALLATION PROCEDURE
1. Install the rear seat adjuster cross bar (2) to the seat with two bolts (3).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the rear seat adjuster cross bar bolts to 25 N.m (18 lb ft).
2. Install the J-strip (1) to the seat adjuster cross bar (2).
3. Hook the seat back cushion extension panel strap (1) to the extension panel (2).