Replacing Engine Gaskets

Replacing Engine Gaskets

Tools Required
- J28410 Gasket Remover

Gasket Use and Applying Sealants
Do not use any gasket again unless specified.

Gaskets that can be used again will be identified in the service procedure.

Do not apply sealant to any gasket or sealing surface unless called out in the service information.

Cleaning Gasket Surfaces
Remove all gasket and sealing material from the part using a plastic or wood scraper (if required).

Care must be used to avoid gouging or scraping the sealing surfaces.

Do not use any other method or technique to remove sealant or gasket material from a part.

Do not use abrasive pads, sand paper, or power tools to clean the gasket surfaces.
+ These methods of cleaning can cause damage to the component sealing surfaces.
+ Abrasive pads also produce a fine grit that the oil filter cannot remove from the oil.
+ This grit is abrasive and has been known to cause internal engine damage.