Air Temperature Door

AIR TEMPERATURE DOOR REPLACEMENT

REMOVAL PROCEDURE
1. Remove the HVAC module assembly (1).







2. Remove screws in order to separate the HVAC module assembly.
3. Remove the screws from the air temperature actuator.
4. Remove the air temperature actuator.
5. Remove the screws from the mode actuator.
6. Remove the mode actuator.
7. Separate the HVAC module case halves.







8. Remove the air temperature door (1) from the lower module half.



INSTALLATION PROCEDURE







1. Install the air temperature door (1) to the lower module half.
2. Assemble the HVAC module case halves.
3. Install the mode actuator.
4. Install the screws to the mode actuator.

NOTE: Refer to Fastener Notice in Service Precautions.
Vehicle Damage Warnings

Tighten
Tighten the screws to .....1.9 N.m (17 lb in).

5. Install the air temperature actuator.
6. Install the screws to the air temperature actuator.

Tighten
Tighten the screws to .....1.9 N.m (17 lb in).




7. Install the screws in order to assemble the HVAC module.

Tighten
Tighten the screws to .....1.9 N.m (17 lb in).

8. Install the HVAC module assembly (1).