Camshaft Position Sensor: Service and Repair

REMOVAL PROCEDURE

Camshaft Position Sensor (CMP):

1. Remove the intake manifold.

IMPORTANT: Clean the are around the camshaft position (CMP) sensor before removal in order to prevent debris from entering the engine.

2. Remove the CMP sensor bolt.
3. Remove the CMP sensor.

INSTALLATION PROCEDURE

Camshaft Position Sensor (CMP):

1. Install the CMP sensor.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the CMP sensor bolt.

Tighten
Tighten the bolt to 29 N.m (21 lb ft).

3. Install the intake manifold.