Seat Back Release Latch Replacement - Rear No. 1 (TrailBlazer EXT, Envoy XL)

Seat Back Release Latch Replacement - Rear No. 1 (TrailBlazer EXT, Envoy XL)

Removal Procedure

1. Remove the head restraint.




2. Remove the two screws securing the seat back release latch handle to the seat back.
3. Remove the seat back cover and pad.




4. Remove the clips (2) securing the seat back release latch cable to the seat back frame.
5. Remove the cable from the slot in the cam (1).

Installation Procedure




1. Install the clips securing the seat back release latch cable to the seat back frame.
2. Install the cable end into the cam (1).
3. Install the seat back cover and pad.

Notice: Refer to Fastener Notice in Service Precautions.

4. Install the seat back release latch handle to the seat back with two screws.

Tighten the seat back release latch handle screws to 2 N.m (18 lb in).