Air Cleaner Housing: Service and Repair

AIR CLEANER ASSEMBLY REPLACEMENT

REMOVAL PROCEDURE
1. Remove the air cleaner cover/resonator then position the air cleaner element and air outlet duct out of the way.




2. Remove the two air cleaner housing/washer solvent tank assembly retaining nuts (1) from the two studs (3).
3. Disconnect all of the washer pump electrical connectors.
4. Disconnect all of the washer pump hoses and plug the washer pump outlet ports to prevent leakage of washer fluid.
5. Lift the lower air filter housing/washer solvent tank assembly off of the studs (3) and remove the assembly.

INSTALLATION PROCEDURE




1. Install the lower air filter housing/washer solvent tank assembly onto the studs (3).
2. Reconnect all of the washer pump hoses to the washer pumps.
3. Reconnect all of the washer pump electrical connectors.
4. Install the two air cleaner housing/washer solvent tank assembly retaining nuts (1) to the two studs (3).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the nuts to 15 N.m (11 lb ft).

5. Install the air cleaner cover/resonator.