Oil Pressure Sensor: Service and Repair

Engine Oil Pressure Sensor and/or Switch Replacement

Removal Procedure







1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the engine shield.
3. Remove the electrical connector from the oil pressure switch.
4. Remove the oil pressure switch.


Installation Procedure

NOTICE: Refer to Fastener Notice in Service Precautions.
Fastener Notice







1. Install the oil pressure switch.
Tighten the oil pressure switch to 20 Nm (15 ft. lbs.).

2. Install the electrical connector to the oil pressure switch.
3. Install the engine shield.
4. Lower the vehicle.