Theft Deterrent Alarm Replacement
THEFT DETERRENT ALARM REPLACEMENTREMOVAL PROCEDURE
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Disconnect the electrical connector from the theft deterrent alarm (3).
3. Remove the theft deterrent alarm mounting nut (1) from the crossmember support (2).
4. Remove the theft deterrent alarm (3) from the crossmember support (2).
INSTALLATION PROCEDURE
1. Install the theft deterrent alarm (3) to the crossmember support (2).
2. Install the theft deterrent alarm (3) to the crossmember support (2) with mounting nut (1).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the nut to 5 N.m (44 lb in).
3. Connect the electrical connector to theft deterrent alarm (3).
4. Lower the vehicle.