Replacement - Auxiliary Rear
BLOWER MOTOR REPLACEMENT - AUXILIARY REARREMOVAL PROCEDURE
1. Remove the right rear quarter trim panel.
2. Remove the retaining bolts (5) from the HVAC module-auxiliary (1).
3. Remove the retaining nuts (4) from the HVAC module-auxiliary (1) under the vehicle.
4. Disconnect the electrical connectors (3,4).
5. Remove the blower motor screws.
6. Remove the blower motor (1) from the HVAC module-auxiliary (2).
INSTALLATION PROCEDURE
1. Install the blower motor-auxiliary (1) to the HVAC module-auxiliary (2).
2. Install the blower motor-auxiliary screws.
NOTE: Refer to Fastener Notice in Service Precautions.
Vehicle Damage Warnings
Tighten
Tighten the screws to 2 N.m (18 lb in).
3. Connect the electrical connectors (3,4).
4. Install the retaining bolts (5) to the HVAC module-auxiliary.
5. Tighten the HVAC module-auxiliary retaining bolts (5).
NOTE: Refer to Fastener Notice in Service Precautions.
Vehicle Damage Warnings
Tighten
Tighten the bolts to 10 N.m (88 lb in).
6. Install the retaining nuts (4) to the HVAC module-auxiliary (1) under the vehicle.
Tighten
Tighten the nuts to 10 N.m (88 lb in).
7. Install the right rear quarter trim.