Crankshaft, Engine

Connecting Rod Journal
Diameter
Production 53.318 - 53.338 mm (2.0991 - 2.0999 inch)
Service 53.308 mm (2.0987 inch)

Out-of-Round
Production 0.005 mm (0.0002 inch)
Service 0.01 mm (0.0004 inch)

Taper - Maximum for 1/2 of Journal Length
Production 0.005 mm (0.0002 inch)
Service 0.02 mm (0.00078 inch)

Crankshaft End Play 0.04 - 0.2 mm (0.0015 - 0.0078 inch)

Crankshaft Main Bearing
Clearance
Production 0.02 - 0.052 mm (0.0008 - 0.0021 inch)
Service 0.02 - 0.065 mm (0.0008 - 0.0025 inch)

Diameter
Production 64.993 - 65.007 mm (2.558 - 2.559 inch)
Service 64.993 mm (2.558 inch)

Crankshaft Main Journal
Out-of-Round
Production 0.003 mm (0.000118 inch)
Service 0.008 mm (0.0003 inch)

Taper
Production 0.01 mm (0.0004 inch)
Service 0.02 mm (0.00078 inch)

Crankshaft Rear Flange Runout 0.05 mm (0.002 inch)

Crankshaft Reluctor Ring Runout 0.7 mm (0.028 inch)
(Measured 1.0 mm (0.04 inch) Below Tooth Diameter)

Crankshaft Thrust Surface
Production 26.14 - 26.22 mm (1.029 - 1.0315 inch)
Service 26.22 mm (1.0315 inch)

Crankshaft Thrust Surface Runout 0.025 mm (0.001 inch)