Bezel Replacement - Floor Console Extension - Upper
BEZEL REPLACEMENT - FLOOR CONSOLE EXTENSION - UPPERREMOVAL PROCEDURE
1. Remove the I/P cluster bezel.
2. Remove the center console four hold down retaining bolts. Do not separate the console from the console extension.
3. Remove the console extension from the I/P.
4. Remove the retainers as shown in the graphic.
5. Lower the bezel and disconnect the electrical connectors.
6. If replacing the bezel remove the 12 volt power supply outlets.
INSTALLATION PROCEDURE
1. Install the 12 volt power supply outlet to new bezel.
2. Connect the electrical connectors
3. Install the retainers as shown in the graphic.
4. Install the console extension to the I/P.
5. Install the center console four hold down retaining bolts.
6. Install the I/P cluster bezel.