Bracket Replacement - Console Floor

Bracket Replacement - Console Floor

Removal Procedure

1. Remove both front seats.
2. Remove the upper console bezel.
3. Remove the cupholder.




4. Remove the screws (1) retaining the console to the I/P.
5. Move the console assembly rearwards in order to disconnect the wire connectors.
6. Remove the console assembly from the vehicle.
7. Remove the console bin.
8. Remove the amplifier and bracket from the console bracket.
9. Remove the fasteners retaining the console to the bracket.

Installation Procedure

1. Install the console to the bracket.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the fasteners retaining the console to the bracket.

Tighten the fasteners to 2 N.m (17 lb in).

3. Install the amplifier and bracket to the console bracket.
4. Install the console bin.
5. Install the rear seat audio control to the console, if equipped.



6. Install the console in the vehicle.
7. Connect the wire connectors.
8. Move the console forward in order to install the retaining screws.
9. Install the 2 screws.

Tighten the screws to 4 N.m (35 lb in).

10. Install the cupholder to the console.
11. Install the upper console bezel.
12. Install both front seats.