Indicators
INDICATOR/WARNING MESSAGE DESCRIPTION AND OPERATIONIndicators Part 1:
Indicators Part 2:
Indicators Part 3:
Indicators Part 4:
INDICATORS
DIC Warning Messages Part 1:
DIC Warning Messages Part 2:
DIC Warning Messages Part 3:
DIC Warning Messages Part 4:
DIC Warning Messages Part 5:
DIC WARNING MESSAGES
CHANGE ENGINE OIL
The IPC illuminates the CHANGE ENGINE OIL message when the powertrain control module (PCM) determines that the engine oil should be changed. The IPC receives a class 2 message from the PCM indicating the remaining oil life percent. Once the oil is changed, perform the engine oil monitor reset procedure in order to clear the Change Engine Oil indicator.
CHECK ENG OIL LEVEL
The IPC illuminates the CHECK ENG OIL LEVEL message in the driver information center (DIC) when the powertrain control module (PCM) detects a low engine oil level condition. The PCM only monitors the oil level switch signal circuit for a brief period between key on and ignition crank. The IPC receives a class 2 message from the PCM requesting illumination.
CHECK ENG OIL PRESSURE
The IPC illuminates the CHECK ENG OIL PRESSURE message in the driver information center (DIC) when the powertrain control module (PCM) detects a low engine oil pressure condition. The IPC receives a class 2 message from the PCM requesting illumination.
LOW FUEL
The IPC illuminates the LOW FUEL message in the driver information center (DIC) and the LOW FUEL indicator when the IPC detects that the fuel level is less than a pre-determined value. The IPC receives a class 2 message from the PCM indicating fuel level percent.
ICE POSSIBLE
The IPC illuminates the ICE POSSIBLE message in the driver information center (DIC) when the outside air temperature drops below 4°C (39°F). The IPC receives a class 2 message from the body control module (BCM) indicating the outside air temperature.
OIL PRESSURE LOW STOP ENGINE
The IPC illuminates the OIL PRESSURE LOW STOP ENGINE message in the driver information center (DIC) when the PCM detects a low oil pressure condition with the signal circuit low. The IPC receives a class 2 message from the PCM requesting illumination.
OVERSPEED
The IPC illuminates the OVERSPEED indicator when the IPC detects that the vehicle speed is more than 120 km/h (75 mph).
PROGRAM CLUSTER
The IPC illuminates the PROGRAM CLUSTER message in the driver information center (DIC) when the IPC has not been programmed after an IPC replacement.
SPEED LIMITED TO XXX MPH
The IPC illuminates the SPEED LIMITED TO XXX MPH message in the driver information center (DIC)
SHIFT INDICATOR
The IPC illuminates the shift indicator when the PCM determines that the vehicle should be shifted to the next higher gear. The IPC receives a class 2 message from the PCM requesting illumination.
WATER IN FUEL
The IPC illuminates the WATER IN FUEL message in the driver information center (DIC) when the powertrain control module (PCM) detects a low signal from the water in fuel sensor. The IPC receives a class 2 message from the PCM requesting illumination.