Fuel Gage Inaccurate or Inoperative - Dual Tanks

DIAGNOSTIC AIDS
- Ensure that the fuel level is in the same range as the customer concern.
- For intermittent diagnosis, refer to Diagnostic Aids for Circuit Testing and Wiring Repair procedures.
- Refer to Fuel Level Specifications in order to verify the correct fuel level sender readings. The fuel level is available on the scan tool in the Fuel Tank Level Remaining (%) parameter in the PCM Enhanced EVAP Data list.

TEST DESCRIPTION

Steps 1-2:

Step 3:

Steps 4-7:

Steps 8-11:

Steps 12-13:

The numbers below refer to the step numbers on the diagnostic table.
3. This step tests for high resistance in the signal circuits and the low reference circuit of the fuel level senders.
13. DTCs will be set in the PCM when you perform this diagnostic table.