Air Temperature Door Replacement

REMOVAL PROCEDURE
1. Remove the heater/vent module. Service and Repair




2. Remove the heater/vent module screws.
3. Separate the heater/vent module halves.
4. Remove the air temperature door (8).

INSTALLATION PROCEDURE




1. Install the air temperature door (8).
2. Assemble the heater/vent module halves.
3. Install the heater/vent module screws.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the screws to 1.6 N.m (14 lb in).

4. Install the heater/vent module.