Vent Hose Connector Replacement (9.25 Inch Axle)

Vent Hose Connector Replacement - Front Drive Axle

Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.





2. Disconnect the vent hose from the vent hose connector.





3. Remove the vent hose connector from the differential carrier assembly.

Installation Procedure
1. Install the vent hose connector into the differential carrier assembly.

Notice: Refer to Fastener Notice in Service Precautions.





2. Tighten the vent hose connector assembly.
Tighten the vent hose connector to 25 Nm (18 lb ft).





3. Connect the vent hose to the vent hose connector.
4. Lower the vehicle.