110. Valve Rocker Arm Cover Installation - Upper Right

Valve Rocker Arm Cover Installation - Upper Right





1. Apply a 2 - 3 mm wide by 0.5 - 1.5 mm high bead of P/N 97720043 sealant to the mating surface of the upper valve rocker arm cover.





2. Install the upper valve rocker arm cover.





Notice: Refer to Fastener Notice in Service and Precautions

3. Install the upper valve rocker arm cover screws.
Tighten the upper valve rocker arm cover screws in the proper sequence to 8 Nm (71 inch lbs.).