Driver Information Center Replacement (Without Sunroof)

DRIVER INFORMATION CENTER REPLACEMENT (WITHOUT SUNROOF)

REMOVAL PROCEDURE




1. Remove the screw at the front of the console that retains the console to the roof.
2. Pull downward at the rear of the console in order to remove the console from the roof.
3. Disconnect the electrical connections as needed.

INSTALLATION PROCEDURE




1. Connect the electrical connections as needed.
2. Insert the mounting tabs into the roof panel and push upward on the rear of the console in order to install the console to the roof.
3. Install the screw at the front of the console that retains the console to the roof.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the screw to 1.9 N.m (17 lb in).