Fuel Filter: Service and Repair

REMOVAL PROCEDURE
1. Relieve the fuel pressure.
2. Raise the vehicle.




3. Remove the fuel filter quick-connect fittings.
4. Remove the clamp bolt.
5. Remove the filter and the clamp from the fuel pipes.




6. Remove the clamp from the filter.

INSTALLATION PROCEDURE





1. Install the clamp to the fuel filter.

NOTE: Always re-attach the fuel lines and fuel filter with all original type fasteners and hardware.

Do not repair sections of fuel pipes.

2. Install the filter and clamp to the fuel pipes.
3. Install the clamp bolt.




4. Install the fuel filter quick-connect fitting.
5. Connect the negative battery cable.
6. Lower the vehicle.
7. Inspect for fuel leaks through the following steps:
7.1. Turn ON the ignition for 2 seconds.
7.2. Turn OFF the ignition for 10 seconds.
7.3. Turn ON the ignition.
7.4. Inspect for fuel leaks.