Bracket Replacement - Steering Column
BRACKET REPLACEMENT - STEERING COLUMNREMOVAL PROCEDURE
1. Remove the instrument panel.
IMPORTANT: The steering column support is not serviceable.
2. Remove the brake switch.
3. Remove the brake booster pushrod from the brake pedal.
4. Remove the clutch master cylinder pushrod from the clutch pedal, if equipped.
5. Remove the following steering column support fasteners:
- The 4 flange nuts
- The 2 bolts
6. Remove the brake pedal from the steering column support.
INSTALLATION PROCEDURE
1. Install the brake pedal to the steering column support.
2. Install the steering column support bracket fasteners.
NOTE: Refer toFastener Notice in Service Precautions.
Tighten
- Tighten the nuts to 25 N.m (18 lb ft).
- Tighten the bolts to 25 N.m (18 lb ft).
1. Install the brake switch.
2. Install the brake booster pushrod to the brake pedal.
3. Install the clutch master cylinder pushrod to the clutch pedal, if equipped.
4. Install the instrument panel.