Evaporative Emission Control Canister: Service and Repair

EVAPORATIVE EMISSION (EVAP) CANISTER REPLACEMENT

REMOVAL PROCEDURE
1. Raise the vehicle.

CAUTION: Refer to Vehicle Lifting Caution in Service Precautions.




2. Remove the canister mounting bolts.
3. After marking the hoses, disconnect the hoses from the canister.
4. Remove the canister (1).

INSTALLATION PROCEDURE




1. Connect the hoses to the canister (1).
2. Install the canister to the bracket.
3. Install the canister mounting bolts.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the evaporative emission (EVAP) canister retainer bolt to 12 N.m (106 lb in).

4. Lower the vehicle.