Inflatable Restraint Instrument Panel Module Replacement

REMOVAL PROCEDURE




1. Disable the SIR System. Refer to SIR Disabling and Enabling Zone 1.

CAUTION:
- Refer to SIR Caution in Service Precautions.
- Refer to SIR Inflator Module Handling and Storage Caution in Service Precautions.

2. Remove the radio.
3. Remove the I/P storage compartment door.
4. Remove the fasteners (4,5) that retain inflatable restraint module to the instrument panel.
5. Remove the inflatable restraint module (2) from the instrument panel (3).
6. Fully deploy the module before disposal. If the module was replaced under warranty, fully deploy and dispose of the module after the required retention period. Refer to Inflator Module Handling and Scrapping.

INSTALLATION PROCEDURE




1. Install the inflatable restraint module to the instrument panel.
2. Install the fasteners (1) that retain the inflatable restraint module (2) to the instrument panel (3).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the retaining nuts (5) and bolts (4) to 8.0 N.m (70 lb in).

3. Install the radio.
4. Install the I/P storage compartment door.
5. Enable the SIR System. Refer to SIR Disabling and Enabling Zone 1.