Pilot Bearing: Service and Repair

Pilot Bearing Replacement

^ Tools Required
- J 43276 Clutch Pilot Bearing Remover
- J26516-A Clutch Pilot Bearing Installer
- J 8092 Driver Handle

Removal Procedure





1. Remove the Flywheel.

Caution: Refer to Safety Glasses Caution in Service Precautions.

Notice: When using the J 43276 Clutch Pilot Bearing Remover always secure the J 43276-1 Clutch Pilot Bearing Remover tool body using a wrench. Do not allow the J 43276-1 tool body to rotate. Failing to do so will cause damage to the J 43276-1 tool body.

2. Remove the clutch pilot bearing using the J 43276.
2.1. Install the J 43276-1 tool body into the clutch pilot bearing.
2.2. Using a wrench secure the J 43276-1 tool body.
2.3. Insert the J 43276-2 forcing screw into the J 43276-1 tool body.
2.4. Rotate the J 43276-2 forcing screw clockwise into the J 43276-1 tool body until the clutch pilot bearing is completely removed from the crankshaft.
2.5. Rotate the J 43276-2 forcing screw counterclockwise to remove the J 43276-2 forcing screw from the J 43276-1 tool body.
2.6. Remove the J 43276-1 tool body from the clutch pilot bearing.
3. Discard the clutch pilot bearing.

Installation Procedure

Caution: Refer to Safety Glasses in Service Precautions.





1. Install the NEW clutch pilot bearing using the J 26516-A with the J 8092.
2. Measure to ensure the proper installation depth is obtained.
3. Install the flywheel.