Instrument Panel Storage Compartment - Door Replacement
DOOR REPLACEMENT - INSTRUMENT PANEL (I/P) COMPARTMENTREMOVAL PROCEDURE
1. Remove the right side instrument panel sound insulator.
2. Push up on the J-spring in order to release the storage compartment door.
3. Remove the screws that retain the instrument panel compartment door hinges to the instrument panel.
4. Remove the instrument panel storage compartment door from the instrument panel.
5. Remove the screws that retain the instrument panel compartment bezel to the instrument panel.
6. Remove the instrument panel compartment bezel from the instrument panel.
7. Disconnect the electrical connector from the instrument panel compartment lamp and switch assembly.
INSTALLATION PROCEDURE
1. Connect the electrical connector to the instrument panel compartment lamp and switch assembly.
2. Install the storage compartment bezel to the instrument panel.
3. Install the screws that retain the instrument panel compartment bezel to the instrument panel.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the screws to 1.9 N.m (17 lb in).
4. Install the instrument panel storage compartment door to the instrument panel.
5. Install the screws that retain the instrument panel compartment door hinges to the instrument panel.
Tighten
Tighten the screws to 1.9 N.m (17 lb in).
6. Push the storage compartment into place.
7. Install the right side instrument panel sound insulator.