Cruise Control Module: Service and Repair

CRUISE CONTROL MODULE REPLACEMENT

REMOVAL PROCEDURE




1. Disconnect the battery negative cable.

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.

2. Disconnect the cruise control cable.
3. Disconnect the electrical connector.
4. Remove the 3 nuts that retain the cruise control module to the mounting bracket studs.
5. Remove the cruise control module from the mounting bracket.
6. Remove the 3 screws that retain the mounting bracket to the cowl panel.

INSTALLATION PROCEDURE




1. Install the mounting bracket to the cowl panel with the 3 screws.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the cruise control module bracket screws to 4.5 N.m (40 lb in).

2. Install the cruise control module to the vehicle.
3. Install the 3 nuts that retain the cruise control module to the mounting bracket.

Tighten
Tighten the cruise control module nuts to 9.0 N.m (6.6 lb ft).

4. Connect the electrical connector.
5. Install the cruise control cable.
6. Connect the battery negative cable.
7. Test the systems operation.