Shift Lever

Shift Lever Replacement- On Vehicle

Removal Procedure





1. Remove the lower trim cover.
2. Roll the shift lever boot back until the shift lever mounting screw is exposed.
3. Remove the shift lever mounting screw.
4. Remove the shift lever wiring from the retainer clips and tie strap.
5. Disconnect the shift lever electrical connector.
6. Remove the shift lever.

Installation Procedure





1. Install the shift lever.
2. Connect the shift lever electrical connector.
3. Install the wiring on the retainer clips and new tie straps.

Notice: Refer to Fastener Notice in Service Precautions.

4. Install the shift lever mounting screw.
- Tighten the shift lever mounting screw to 22 Nm (16 ft. lbs.).
5. Roll the shift lever boot over the shift lever mounting screw.
6. Install the lower column cover.